In this video, we’ll show you how to use a tractor-powered snowblower to move lots and lots of snow.
For this project, we’ll be using a Frontier SB1174 3-point Snowblower (US CA), and a John Deere 4052M Compact Utility Tractor (US CA). We’re also using a D170 loader and a 73-inch materials bucket for balance, and because they’re two of the most useful tools you’ll ever have around your place.
We also added an iMatchTM Quick Hitch to our tractor, which makes hooking up our snowblower as easy as possible.
Getting ready to use a tractor-powered snowblower.
Step 1 to use a tractor powered snowblower is to hook it up properly. So, after locking down the snowblower on the iMatch, make sure it’s level front to back by adjusting the top link if necessary. Then attach the PTO shaft to the tractor, close the driveline shield, and attach the safety chain for the PTO.
Adjust both skid shoes to provide about an inch of ground clearance to help protect the snowblower and the surface you’re clearing.
When you’re on-site and ready to start, adjust the chute to blow snow in the direction you want it to go, and to make sure you don’t blow snow into the wind. Then adjust the deflector angle for blowing snow the preferred distance.
Get started and finish the right way.
As you can see in the video, the snowblower auger and impeller can eat a lot of snow. But that doesn’t mean you can move through it quickly. The key is maintaining a steady, moderate speed so the snowblower can handle all the snow you want removed without becoming overloaded. If the snow you’re working is very deep, use the 3-point hitch to raise your snowblower to remove a top layer that your specific snowblower can handle. Then start over and take another layer so you don’t overload the auger, impeller, or chute.
AND, when you’re done, always, always, always remember to clean out the auger, impeller and chute thoroughly. Snow left in them can freeze and prevent the snowblower from operating properly at next start up, causing damage to the machine’s internal parts.
That way, when the snow starts falling on your property, you AND your snowblower will be ready to go.
So remember, for implements that help turn your tractor into the workhorse it was built to be, think Frontier and your John Deere dealer.
Frontier’s nearly 400 implements and attachments are designed, engineered, tested, and manufactured to fit and work with John Deere tractors. That’s a breadth and depth of John Deere and Frontier equipment compatibility you won’t find anywhere else in the world.
But we don’t stop there.
Beyond product performance, Frontier equipment is fully supported with John Deere warranty, service, parts, and customer support throughout our North America John Deere dealer network.
Whether it’s your land, your job, or your life, experience the fun and true satisfaction you’re looking for. You, John Deere and Frontier. Let’s work together.
Helpful Links:
Frontier Snow Removal Equipment (US CA)
How To Remove Snow 3 Different Ways
How To Get Driveway Gravel Out Of The Grass